How to do IJ start Canon Setup Wirelessly

Usually, people will use a printer that is connected to a computer or laptop with a printer cable. Then along with technological advances now print documents wirelessly or via wireless can be done. You can use a printer that is equipped with wireless so you don’t use the cable again.

In addition, you can also change the cable printer to wireless by sharing printers from Windows. You can also use a shared printer from many computers wirelessly.

For the operating method, this wireless printer can be used to print actual documents is not difficult. You only need to do a few simple settings for IJ.Start.Canon setup so that the laptop or computer that is used can connect to a wireless printer so that it can print documents.

WiFi sharing printer means here is a printer that is not equipped with wireless devices by default, but is connected to a computer that is shared so that it can connect to many computers or laptops using WiFi. For how to use it, please follow the steps below.

Ij Start Canon Setup Connection Using WPS

• Ensure that the access point button is ready to Start.

• Please press still for 2 seconds the Wi-Fi button (A) On your printer until the Alarm lamp. (B) blinks once, at that point discharges the Wi-Fi button after the blaze.

• Make sure the Wi-Fi light (C) blinks quickly and the ON (D) light is on, then press and hold the hook at the entry point within 2 minutes to do Ij.Start.Canon Setup.

• Make sure the Wi-Fi lamp and ON light are on.

• If your computer has successfully connected to a WiFi sharing printer, then you can already use it to print documents. Please open the document that you want to print, then select print. Then you will see that the printer you are connecting to is ready to be used to print documents.

• That Is how to Ij Start Canon Setup

IJ start Canon Setup instruction Windows OS

Download / Installation Procedures

1. Click the link, choose [Save ], specify “Save As”, then click [Save ] to transfer the file.

Memo: If you choose [Run ] ( or [Open ] ) rather than [Save ], the file are going to be mechanically put in when it's saved.

2. The downloaded file are going to be saved within the fixed place within the self-extracting kind ( .exe format ).

3. Double-click the downloaded EXE file to decompress it, then installation can start mechanically for IJ.Start.Canon Setup.

Instructions for canon printer setup for MAC OS

Procedures for the transfer and installation

1. Transfer the file. For the situation wherever the file is saved, check the PC settings.

2. Double-click the downloaded file and mount it on the Disk Image.

3. Double-click the mounted Disk Image.

4. Double-click the prepacked entry in the folder. Installation starts mechanically.